Ridgeway Civil War Research Center, A virtual examination of artifacts of the American Civil War
	Civil War Weapons, all pre 1898
	by Harry Ridgeway

Breechloader, Burnside single shot percussion carbine, Model of 1864, lever is hinged with guide screw, .54cal. . Burnside carbine employed an unusual cone shaped metal cartridge for use in a percussion system. The Model of 1864 was the last percussion model produced by Burnside. This model has been described as 5th model (that is erroneous), or 6th model, however either of these designations are collector terms of convenience and not contemporary designations. Serial numbers were reset to zero and number to about 19000, production estimated 1864 and 1865. This model represented only modest changes from the earlier models, most notably being introduction of the 1864 model date, the trigger tang was lengthened and serial numbers reset. Use of the guide screw introduced with the 5th model was continued. The barrel is stamped Cast Steel 1864, the date may be weak or missing, this because the long and narrow stamp had to be centered on a round barrel, apparently most were not centered and the date at the end was simply lost. Manufactured by Burnside Rifle Co., Providence, Rhode Island, General Ambrose Burnside, was an official in the company before the war but was not involved in wartime development of the weapon. Marks on top of frame BURNSIDE PATENT / MODEL OF 1864. Barrel is marked CAST STEEL 1864. Lock marked BURNSIDE RIFLE CO. / PROVIDENCE = R. I. . Serial number normally appears three times, on the top of the breech, top of the receiver, and inside (can be viewed by opening the breech). Cartouches in the wood on the left side indicate government inspection, additional inspector marks on various parts. Standard features include: iron buttplate, single iron barrel band, saddle riding bar and ring on left side, strap hook on bottom of butt, iron loading lever also serves as a trigger guard, hinged sight, chamber tapered for unique Burnside metal cartridge with a priming hole in the bottom for percussion. Research Center: Weapon2066-Breechloader-Burnside-Carbine-Model-1864 . Reference: Flayderman 9B-046, Model of 1864. Barrel length 21in. Details click: http://relicman.com/weapons/Weapon2066-Breechloader-Burnside-Carbine-Model-1864.html

W0430 ### Breechloader, Burnside single shot percussion carbine, Model of 1864, lever is hinged with guide screw, .54cal. (sn# 215) . Burnside carbine employed an unusual cone shaped metal cartridge for use in a percussion system. The Model of 1864 was the last percussion model produced by Burnside. This model has been described as 5th model (that is erroneous), or 6th model, however either of these designations are collector terms of convenience and not contemporary designations. Serial numbers were reset to zero and number to about 19000, production estimated 1864 and 1865. This model represented only modest changes from the earlier models, most notably being introduction of the 1864 model date, the trigger tang was lengthened and serial numbers reset. Use of the guide screw introduced with the 5th model was continued. The barrel is stamped Cast Steel 1864, the date may be weak or missing, this because the long and narrow stamp had to be centered on a round barrel, apparently most were not centered and the date at the end was simply lost. Manufactured by Burnside Rifle Co., Providence, Rhode Island, General Ambrose Burnside, was an official in the company before the war but was not involved in wartime development of the weapon. Marks on top of frame BURNSIDE PATENT / MODEL OF 1864. Barrel is marked CAST STEEL 1864. Lock marked BURNSIDE RIFLE CO. / PROVIDENCE = R. I. . Serial number normally appears three times, on the top of the breech, top of the receiver, and inside (can be viewed by opening the breech). Cartouches in the wood on the left side indicate government inspection, additional inspector marks on various parts. Standard features include: iron buttplate, single iron barrel band, saddle riding bar and ring on left side, strap hook on bottom of butt, iron loading lever also serves as a trigger guard, hinged sight, chamber tapered for unique Burnside metal cartridge with a priming hole in the bottom for percussion. Research Center: Weapon2066-Breechloader-Burnside-Carbine-Model-1864 . Reference: Flayderman 9B-046, Model of 1864. Barrel length 21in. Serial number 215.

W0947 ### Breechloader, Burnside single shot percussion carbine, Model of 1864, lever is hinged with guide screw, .54cal. (sn# 2257) . Burnside carbine employed an unusual cone shaped metal cartridge for use in a percussion system. The Model of 1864 was the last percussion model produced by Burnside. This model has been described as 5th model (that is erroneous), or 6th model, however either of these designations are collector terms of convenience and not contemporary designations. Serial numbers were reset to zero and number to about 19000, production estimated 1864 and 1865. This model represented only modest changes from the earlier models, most notably being introduction of the 1864 model date, the trigger tang was lengthened and serial numbers reset. Use of the guide screw introduced with the 5th model was continued. The barrel is stamped Cast Steel 1864, the date may be weak or missing, this because the long and narrow stamp had to be centered on a round barrel, apparently most were not centered and the date at the end was simply lost. Manufactured by Burnside Rifle Co., Providence, Rhode Island, General Ambrose Burnside, was an official in the company before the war but was not involved in wartime development of the weapon. Marks on top of frame BURNSIDE PATENT / MODEL OF 1864. Barrel is marked CAST STEEL 1864. Lock marked BURNSIDE RIFLE CO. / PROVIDENCE = R. I. . Serial number normally appears three times, on the top of the breech, top of the receiver, and inside (can be viewed by opening the breech). Cartouches in the wood on the left side indicate government inspection, additional inspector marks on various parts. Standard features include: iron buttplate, single iron barrel band, saddle riding bar and ring on left side, strap hook on bottom of butt, iron loading lever also serves as a trigger guard, hinged sight, chamber tapered for unique Burnside metal cartridge with a priming hole in the bottom for percussion. Research Center: Weapon2066-Breechloader-Burnside-Carbine-Model-1864 . Reference: Flayderman 9B-046, Model of 1864. Barrel length 21in. Serial number, 2257.

W1390 ### Breechloader, Burnside single shot percussion carbine, Model of 1864, lever is hinged with guide screw, .54cal. (sn# 3547) . Burnside carbine employed an unusual cone shaped metal cartridge for use in a percussion system. The Model of 1864 was the last percussion model produced by Burnside. This model has been described as 5th model (that is erroneous), or 6th model, however either of these designations are collector terms of convenience and not contemporary designations. Serial numbers were reset to zero and number to about 19000, production estimated 1864 and 1865. This model represented only modest changes from the earlier models, most notably being introduction of the 1864 model date, the trigger tang was lengthened and serial numbers reset. Use of the guide screw introduced with the 5th model was continued. The barrel is stamped Cast Steel 1864, the date may be weak or missing, this because the long and narrow stamp had to be centered on a round barrel, apparently most were not centered and the date at the end was simply lost. Manufactured by Burnside Rifle Co., Providence, Rhode Island, General Ambrose Burnside, was an official in the company before the war but was not involved in wartime development of the weapon. Marks on top of frame BURNSIDE PATENT / MODEL OF 1864. Barrel is marked CAST STEEL 1864. Lock marked BURNSIDE RIFLE CO. / PROVIDENCE = R. I. . Serial number normally appears three times, on the top of the breech, top of the receiver, and inside (can be viewed by opening the breech). Cartouches in the wood on the left side indicate government inspection, additional inspector marks on various parts. Standard features include: iron buttplate, single iron barrel band, saddle riding bar and ring on left side, strap hook on bottom of butt, iron loading lever also serves as a trigger guard, hinged sight, chamber tapered for unique Burnside metal cartridge with a priming hole in the bottom for percussion. Research Center: Weapon2066-Breechloader-Burnside-Carbine-Model-1864 . Reference: Flayderman 9B-046, Model of 1864. Barrel length 21in. Serial number, 3547.

W1126 ### Breechloader, Burnside single shot percussion carbine, Model of 1864, lever is hinged with guide screw, .54cal. (sn# 3840) . Burnside carbine employed an unusual cone shaped metal cartridge for use in a percussion system. The Model of 1864 was the last percussion model produced by Burnside. This model has been described as 5th model (that is erroneous), or 6th model, however either of these designations are collector terms of convenience and not contemporary designations. Serial numbers were reset to zero and number to about 19000, production estimated 1864 and 1865. This model represented only modest changes from the earlier models, most notably being introduction of the 1864 model date, the trigger tang was lengthened and serial numbers reset. Use of the guide screw introduced with the 5th model was continued. The barrel is stamped Cast Steel 1864, the date may be weak or missing, this because the long and narrow stamp had to be centered on a round barrel, apparently most were not centered and the date at the end was simply lost. Manufactured by Burnside Rifle Co., Providence, Rhode Island, General Ambrose Burnside, was an official in the company before the war but was not involved in wartime development of the weapon. Marks on top of frame BURNSIDE PATENT / MODEL OF 1864. Barrel is marked CAST STEEL 1864. Lock marked BURNSIDE RIFLE CO. / PROVIDENCE = R. I. . Serial number normally appears three times, on the top of the breech, top of the receiver, and inside (can be viewed by opening the breech). Cartouches in the wood on the left side indicate government inspection, additional inspector marks on various parts. Standard features include: iron buttplate, single iron barrel band, saddle riding bar and ring on left side, strap hook on bottom of butt, iron loading lever also serves as a trigger guard, hinged sight, chamber tapered for unique Burnside metal cartridge with a priming hole in the bottom for percussion. Research Center: Weapon2066-Breechloader-Burnside-Carbine-Model-1864 . Reference: Flayderman 9B-046, Model of 1864. Barrel length 21in. Serial number, 3840.

W1396 ### Breechloader, Burnside single shot percussion carbine, Model of 1864, lever is hinged with guide screw, .54cal. (sn# 7019) . Burnside carbine employed an unusual cone shaped metal cartridge for use in a percussion system. The Model of 1864 was the last percussion model produced by Burnside. This model has been described as 5th model (that is erroneous), or 6th model, however either of these designations are collector terms of convenience and not contemporary designations. Serial numbers were reset to zero and number to about 19000, production estimated 1864 and 1865. This model represented only modest changes from the earlier models, most notably being introduction of the 1864 model date, the trigger tang was lengthened and serial numbers reset. Use of the guide screw introduced with the 5th model was continued. The barrel is stamped Cast Steel 1864, the date may be weak or missing, this because the long and narrow stamp had to be centered on a round barrel, apparently most were not centered and the date at the end was simply lost. Manufactured by Burnside Rifle Co., Providence, Rhode Island, General Ambrose Burnside, was an official in the company before the war but was not involved in wartime development of the weapon. Marks on top of frame BURNSIDE PATENT / MODEL OF 1864. Barrel is marked CAST STEEL 1864. Lock marked BURNSIDE RIFLE CO. / PROVIDENCE = R. I. . Serial number normally appears three times, on the top of the breech, top of the receiver, and inside (can be viewed by opening the breech). Cartouches in the wood on the left side indicate government inspection, additional inspector marks on various parts. Standard features include: iron buttplate, single iron barrel band, saddle riding bar and ring on left side, strap hook on bottom of butt, iron loading lever also serves as a trigger guard, hinged sight, chamber tapered for unique Burnside metal cartridge with a priming hole in the bottom for percussion. Research Center: Weapon2066-Breechloader-Burnside-Carbine-Model-1864 . Reference: Flayderman 9B-046, Model of 1864. Barrel length 21in. Serial number, 7019.

W1236 ### Breechloader, Burnside single shot percussion carbine, Model of 1864, lever is hinged with guide screw, .54cal. (sn# 10442) . Burnside carbine employed an unusual cone shaped metal cartridge for use in a percussion system. The Model of 1864 was the last percussion model produced by Burnside. This model has been described as 5th model (that is erroneous), or 6th model, however either of these designations are collector terms of convenience and not contemporary designations. Serial numbers were reset to zero and number to about 19000, production estimated 1864 and 1865. This model represented only modest changes from the earlier models, most notably being introduction of the 1864 model date, the trigger tang was lengthened and serial numbers reset. Use of the guide screw introduced with the 5th model was continued. The barrel is stamped Cast Steel 1864, the date may be weak or missing, this because the long and narrow stamp had to be centered on a round barrel, apparently most were not centered and the date at the end was simply lost. Manufactured by Burnside Rifle Co., Providence, Rhode Island, General Ambrose Burnside, was an official in the company before the war but was not involved in wartime development of the weapon. Marks on top of frame BURNSIDE PATENT / MODEL OF 1864. Barrel is marked CAST STEEL 1864. Lock marked BURNSIDE RIFLE CO. / PROVIDENCE = R. I. . Serial number normally appears three times, on the top of the breech, top of the receiver, and inside (can be viewed by opening the breech). Cartouches in the wood on the left side indicate government inspection, additional inspector marks on various parts. Standard features include: iron buttplate, single iron barrel band, saddle riding bar and ring on left side, strap hook on bottom of butt, iron loading lever also serves as a trigger guard, hinged sight, chamber tapered for unique Burnside metal cartridge with a priming hole in the bottom for percussion. Research Center: Weapon2066-Breechloader-Burnside-Carbine-Model-1864 . Reference: Flayderman 9B-046, Model of 1864. Barrel length 21in. Serial number, 10442.

W1125 ### Breechloader, Burnside single shot percussion carbine, Model of 1864, lever is hinged with guide screw, .54cal. (sn# 11779) . Burnside carbine employed an unusual cone shaped metal cartridge for use in a percussion system. The Model of 1864 was the last percussion model produced by Burnside. This model has been described as 5th model (that is erroneous), or 6th model, however either of these designations are collector terms of convenience and not contemporary designations. Serial numbers were reset to zero and number to about 19000, production estimated 1864 and 1865. This model represented only modest changes from the earlier models, most notably being introduction of the 1864 model date, the trigger tang was lengthened and serial numbers reset. Use of the guide screw introduced with the 5th model was continued. The barrel is stamped Cast Steel 1864, the date may be weak or missing, this because the long and narrow stamp had to be centered on a round barrel, apparently most were not centered and the date at the end was simply lost. Manufactured by Burnside Rifle Co., Providence, Rhode Island, General Ambrose Burnside, was an official in the company before the war but was not involved in wartime development of the weapon. Marks on top of frame BURNSIDE PATENT / MODEL OF 1864. Barrel is marked CAST STEEL 1864. Lock marked BURNSIDE RIFLE CO. / PROVIDENCE = R. I. . Serial number normally appears three times, on the top of the breech, top of the receiver, and inside (can be viewed by opening the breech). Cartouches in the wood on the left side indicate government inspection, additional inspector marks on various parts. Standard features include: iron buttplate, single iron barrel band, saddle riding bar and ring on left side, strap hook on bottom of butt, iron loading lever also serves as a trigger guard, hinged sight, chamber tapered for unique Burnside metal cartridge with a priming hole in the bottom for percussion. Research Center: Weapon2066-Breechloader-Burnside-Carbine-Model-1864 . Reference: Flayderman 9B-046, Model of 1864. Barrel length 21in. Serial number, 11779.

W0847 ### Breechloader, Burnside single shot percussion carbine, Model of 1864, lever is hinged with guide screw, .54cal. (sn# 13469) . Burnside carbine employed an unusual cone shaped metal cartridge for use in a percussion system. The Model of 1864 was the last percussion model produced by Burnside. This model has been described as 5th model (that is erroneous), or 6th model, however either of these designations are collector terms of convenience and not contemporary designations. Serial numbers were reset to zero and number to about 19000, production estimated 1864 and 1865. This model represented only modest changes from the earlier models, most notably being introduction of the 1864 model date, the trigger tang was lengthened and serial numbers reset. Use of the guide screw introduced with the 5th model was continued. The barrel is stamped Cast Steel 1864, the date may be weak or missing, this because the long and narrow stamp had to be centered on a round barrel, apparently most were not centered and the date at the end was simply lost. Manufactured by Burnside Rifle Co., Providence, Rhode Island, General Ambrose Burnside, was an official in the company before the war but was not involved in wartime development of the weapon. Marks on top of frame BURNSIDE PATENT / MODEL OF 1864. Barrel is marked CAST STEEL 1864. Lock marked BURNSIDE RIFLE CO. / PROVIDENCE = R. I. . Serial number normally appears three times, on the top of the breech, top of the receiver, and inside (can be viewed by opening the breech). Cartouches in the wood on the left side indicate government inspection, additional inspector marks on various parts. Standard features include: iron buttplate, single iron barrel band, saddle riding bar and ring on left side, strap hook on bottom of butt, iron loading lever also serves as a trigger guard, hinged sight, chamber tapered for unique Burnside metal cartridge with a priming hole in the bottom for percussion. Research Center: Weapon2066-Breechloader-Burnside-Carbine-Model-1864 . Reference: Flayderman 9B-046, Model of 1864. Barrel length 21in. Serial number, 13469.

W0863 ### Breechloader, Burnside single shot percussion carbine, Model of 1864, lever is hinged with guide screw, .54cal. (sn# 16745) . Burnside carbine employed an unusual cone shaped metal cartridge for use in a percussion system. The Model of 1864 was the last percussion model produced by Burnside. This model has been described as 5th model (that is erroneous), or 6th model, however either of these designations are collector terms of convenience and not contemporary designations. Serial numbers were reset to zero and number to about 19000, production estimated 1864 and 1865. This model represented only modest changes from the earlier models, most notably being introduction of the 1864 model date, the trigger tang was lengthened and serial numbers reset. Use of the guide screw introduced with the 5th model was continued. The barrel is stamped Cast Steel 1864, the date may be weak or missing, this because the long and narrow stamp had to be centered on a round barrel, apparently most were not centered and the date at the end was simply lost. Manufactured by Burnside Rifle Co., Providence, Rhode Island, General Ambrose Burnside, was an official in the company before the war but was not involved in wartime development of the weapon. Marks on top of frame BURNSIDE PATENT / MODEL OF 1864. Barrel is marked CAST STEEL 1864. Lock marked BURNSIDE RIFLE CO. / PROVIDENCE = R. I. . Serial number normally appears three times, on the top of the breech, top of the receiver, and inside (can be viewed by opening the breech). Cartouches in the wood on the left side indicate government inspection, additional inspector marks on various parts. Standard features include: iron buttplate, single iron barrel band, saddle riding bar and ring on left side, strap hook on bottom of butt, iron loading lever also serves as a trigger guard, hinged sight, chamber tapered for unique Burnside metal cartridge with a priming hole in the bottom for percussion. Research Center: Weapon2066-Breechloader-Burnside-Carbine-Model-1864 . Reference: Flayderman 9B-046, Model of 1864. Barrel length 21in. Serial number, 16745.

This is the "Ridgeway Civil War Research Center", a research tool for educational purposes only, and is provided at no cost to the reader. Some of the relics listed are retained in the author's collection, most reside in other collections and are not owned by the author. None of the items listed in this section are for sale, please refer to relicman.com sales listings for items offered for sale. This is a work in progress, I list items as I get to them, there are many patterns that are not listed yet, this list will be regularly updated as I get pictures and descriptions for more items. I will also correct mistakes, so if you see any please tell me. All items listed are believed to be authentic to the Civil War or as otherwise described. Any excavated relics have been recovered from private property with owners permission.This information is available for research purposes, pictures may be used by permission only.

All weapons listed on this webpage are strictly manufactured before 1898, and are considered unsafe for actual use. These are antique collectible weapons of the Civil War (most are pre 1865, unless I state otherwise) and actual firing of these weapons is not recommended for any purpose whatsoever! Because these are all "pre 1898" weapons, no licenses are required for ownership, but common sense and good judgment should be applied.

Most information on this page is from:
Flayderman's Guide to Antique American Firearms......
John Thillman series, "Civil War Cavalry & Artillery Sabers...", or "Civil War Army Swords....".

Ridgeway Civil War Research Center, A virtual examination of artifacts of the American Civil War Weapons Research center, weapons, click: http://relicman.com/weapons/Weapon0000-Index.html. Research center, weapons, click: http://relicman.com/weapons/Weapon0000-Index.html.

and now a word from our sponsor.....

Civil War Relicman, Harry Ridgeway, Civil War weapons, Relicman sales catalog. Sale listings click: http://relicman.com/weapons/Relicman-Sales-Weapon0000.html. Sale listings click: http://relicman.com/weapons/Relicman-Sales-Weapon0000.html.