Ridgeway Civil War Research Center, A virtual examination of artifacts of the American Civil War
	Civil War Artillery
	by Harry Ridgeway

Research Center: Artillery5082-Read

Rifled artillery projectile, Read design, Confederate manufacture, bursting shell, long pattern with bourrelet rings, tall copper ring sabot with notch, copper time fuze, Confederate rifle, 3.25 or 3.3 in. Projectile was Confederate manufactured during the war employing John Read's design, probably at Selma Arsenal. This pattern utilized two wide bourreletrings, as a labor saving device, only the rings had to be accurately machined, the rest could be left rough. The nose is relatively pointed, and the width of the bourrelet rings varies considerably, presumably this is operator variance in the finishing process. The base is raised and milled to a bevel leaving a depressed ring between the base and the sabot, lathe dimple is found on the base. Read developed this copperring sabot, it was more flexible than the earlier wrought iron sabot, sabot istapered at the top and seated in a deep groove well inside of the iron base,flame grooves were cut into the sabot. Copper ring sabot was cast thin. Fuze employed was a Confederate copper time fuze, two spanner holes, Jones pg. 41. Projectile measures: diameter 3.2in., length 6.6in. (excluding fuze), weight 7.7lbs. Research Center: Artillery5082-Read, Ref: Dickey & George, Field Artillery (1993 Edition), pg. 268. Details click: http://relicman.com/artillery/Artillery5082-Read.html.

A0086... Projectile measures: diameter 3.2in., length 6.6in. (excluding fuze), weight 7.7lbs. Sabot is not fired. Copper time fuze intact. Metal quality solid. Projectile is disarmed, drill hole through the paper section of the time fuze. Recovered: Oconee River cache near Milledgeville, Georgia, which apparently was used as a site after the war to dispose of obsolete Civil War ordnance.

This is the "Ridgeway Civil War Research Center", a research tool for educational purposes only, and is provided at no cost to the reader. Some of the relics listed are retained in the author's collection, most reside in other collections and are not owned by the author. None of the items listed in this section are for sale, please refer to relicman.com sales listings for items offered for sale. This is a work in progress, I list items as I get to them, there are many patterns that are not listed yet, this list will be regularly updated as I get pictures and descriptions for more items. I will also correct mistakes, so if you see any please tell me. All items listed are believed to be authentic to the Civil War or as otherwise described. This information is available for research purposes, pictures may be used by permission only.
All excavated artifacts have been recovered from private property with owner's permission.
All projectiles listed have been disarmed.

Most information on this page is from:
Field Artillery Projectiles of the American Civil War, 1993 Edition. by Thomas S. Dickey and Peter C. George.
Civil War Heavy Explosive Ordnance, A Guide to Large Artillery Prjectiles, Torpedoes, and Mines, by Jack Bell.
Artillery Fuses of the Civil War, by Charles H. Jones.
Pictures are by the author, unless otherwise indicated.

Ridgeway Civil War Research Center, A virtual examination of artifacts of the American Civil War. Artillery Research center, artillery, click: http://relicman.com/artillery/Artillery0000-Index.html. Research center, artillery, click: http://relicman.com/artillery/Artillery0000-Index.html.

and now a word from our sponsor.....

Civil War Relicman, Harry Ridgeway, Civil War artillery, Relicman sales catalog. Click here: http://relicman.com/artillery/RelicmanSalesArtillery1.html. Artillery for sale: http://relicman.com/artillery/RelicmanSalesArtillery1.html.