Ridgeway Civil War Research Center, A virtual examination of artifacts of the American Civil War
	Civil War Artillery
	by Harry Ridgeway

Research Center: Artillery5887-Tennessee

Rifled artillery projectile, Tennessee design, Confederate manufacture, bursting shell, long pattern with bourrelet rings, copper disc sabot with 3 studs in the sabot and flush mounted bolt, copper percussion fuze, rifled 32 pounder, 6.4 in. Projectile was Confederate manufactured and was originally believed to have been developed by Mullane working with Read and others, however, updated research has not been able to confirm the existence of a man named Mullane. Period literature often refers to work as the "Tennessee" design, cup, or sabot, and is attributed to Captain Lardner Gibbon, although official recognition for his development was never granted. The sabot system utilized was a copper disc held in place by studs and secured with a center bolt, a manufacturing innovation allowing the parts made of different metals, copper and iron, to be prepared independent and assembled at the end. This sabot pattern, referred to as Type II, employed three studs cast into the sabot and fitted into holes cast into the shell body, secured by a bolt in the center. This pattern utilized two bourrelet rings, as a labor saving device, only the rings had to be accurately machined, the rest could be left rough , nose is pointed, this pattern is long. Fuze employed was the Archer percussion fuze , Jones pg. 62. Projectile measures: diameter 6.3in., length 12.5in., weight 60lbs. Research Center: Artillery5887-Tennessee, Ref: Bell, Heavy Ordnance, pg. 429, example of this pattern but in 7in.caliber. Details click: http://relicman.com/artillery/Artillery5887-Tennessee.html.

A0852...Rifled artillery projectile, Tennessee design, Confederate manufacture, bursting shell, long pattern with bourrelet rings, copper disc sabot with 3 studs in the sabot and flush mounted bolt, copper percussion fuze, rifled 32 pounder, 6.4 in. Projectile was Confederate manufactured and was originally believed to have been developed by Mullane working with Read and others, however, updated research has not been able to confirm the existence of a man named Mullane. Period literature often refers to work as the "Tennessee" design, cup, or sabot, and is attributed to Captain Lardner Gibbon, although official recognition for his development was never granted. The sabot system utilized was a copper disc held in place by studs and secured with a center bolt, a manufacturing innovation allowing the parts made of different metals, copper and iron, to be prepared independent and assembled at the end. This sabot pattern, referred to as Type II, employed three studs cast into the sabot and fitted into holes cast into the shell body, secured by a bolt in the center. This pattern utilized two bourrelet rings, as a labor saving device, only the rings had to be accurately machined, the rest could be left rough , nose is pointed, this pattern is long. Fuze employed was the Archer percussion fuze , Jones pg. 62. Projectile measures: diameter 6.3in., length 11.25in. shell body without sabot, weight 61lb., sabot missing. Sabot separated on firing and is missing. Percussion fuze is missing. Projectile is disarmed: open fuze hole exposes empty interior. Recovered: North Carolina defenses. Ref: Bell, Heavy Ordnance, pg. 429, example of this pattern but in 7in.caliber....

A0897...Rifled artillery projectile, Tennessee design, Confederate manufacture, bursting shell, long pattern with bourrelet rings, copper disc sabot with 3 studs in the sabot and flush mounted bolt, copper percussion fuze, rifled 32 pounder, 6.4 in. Projectile was Confederate manufactured and was originally believed to have been developed by Mullane working with Read and others, however, updated research has not been able to confirm the existence of a man named Mullane. Period literature often refers to work as the "Tennessee" design, cup, or sabot, and is attributed to Captain Lardner Gibbon, although official recognition for his development was never granted. The sabot system utilized was a copper disc held in place by studs and secured with a center bolt, a manufacturing innovation allowing the parts made of different metals, copper and iron, to be prepared independent and assembled at the end. This sabot pattern, referred to as Type II, employed three studs cast into the sabot and fitted into holes cast into the shell body, secured by a bolt in the center. This pattern utilized two bourrelet rings, as a labor saving device, only the rings had to be accurately machined, the rest could be left rough , nose is pointed, this pattern is long. Fuze employed was the Archer percussion fuze , Jones pg. 62. Projectile measures: diameter 6.3in., length 12.5in., weight 60lbs. Sabot is fired showing weak lands and grooves, and is intact. Percussion fuze missing, outer bushing is present. Projectile is disarmed: open fuze hole exposes empty interior. Recovered: North Carolina defenses. Ref: Bell, Heavy Ordnance, pg. 429, example of this pattern but in 7in.caliber.

A1754...Rifled artillery projectile, Tennessee design, Confederate manufacture, bursting shell, long pattern with bourrelet rings, copper disc sabot with 3 studs in the sabot and flush mounted bolt, copper percussion fuze, rifled 32 pounder, 6.4 in. Projectile was Confederate manufactured and was originally believed to have been developed by Mullane working with Read and others, however, updated research has not been able to confirm the existence of a man named Mullane. Period literature often refers to work as the "Tennessee" design, cup, or sabot, and is attributed to Captain Lardner Gibbon, although official recognition for his development was never granted. The sabot system utilized was a copper disc held in place by studs and secured with a center bolt, a manufacturing innovation allowing the parts made of different metals, copper and iron, to be prepared independent and assembled at the end. This sabot pattern, referred to as Type II, employed three studs cast into the sabot and fitted into holes cast into the shell body, secured by a bolt in the center. This pattern utilized two bourrelet rings, as a labor saving device, only the rings had to be accurately machined, the rest could be left rough , nose is pointed, this pattern is long. Fuze employed was the Archer percussion fuze , Jones pg. 62. Projectile measures: diameter 6.3in., length 12.5in., weight 60lbs. Sabot is fired showing weak lands and grooves, and is intact. Percussion fuze missing, outer bushing is present. Projectile is disarmed: open fuze hole exposes empty interior. Recovered: North Carolina defenses. Ref: Bell, Heavy Ordnance, pg. 429, example of this pattern but in 7in.caliber.

This is the "Ridgeway Civil War Research Center", a research tool for educational purposes only, and is provided at no cost to the reader. Some of the relics listed are retained in the author's collection, most reside in other collections and are not owned by the author. None of the items listed in this section are for sale, please refer to relicman.com sales listings for items offered for sale. This is a work in progress, I list items as I get to them, there are many patterns that are not listed yet, this list will be regularly updated as I get pictures and descriptions for more items. I will also correct mistakes, so if you see any please tell me. All items listed are believed to be authentic to the Civil War or as otherwise described. This information is available for research purposes, pictures may be used by permission only.
All excavated artifacts have been recovered from private property with owner's permission.
All projectiles listed have been disarmed.

Most information on this page is from:
Field Artillery Projectiles of the American Civil War, 1993 Edition. by Thomas S. Dickey and Peter C. George.
Civil War Heavy Explosive Ordnance, A Guide to Large Artillery Prjectiles, Torpedoes, and Mines, by Jack Bell.
Artillery Fuses of the Civil War, by Charles H. Jones.
Pictures are by the author, unless otherwise indicated.

Ridgeway Civil War Research Center, A virtual examination of artifacts of the American Civil War. Artillery Research center, artillery, click: http://relicman.com/artillery/Artillery0000-Index.html. Research center, artillery, click: http://relicman.com/artillery/Artillery0000-Index.html.

and now a word from our sponsor.....

Civil War Relicman, Harry Ridgeway, Civil War artillery, Relicman sales catalog. Click here: http://relicman.com/artillery/RelicmanSalesArtillery1.html. Artillery for sale: http://relicman.com/artillery/RelicmanSalesArtillery1.html.