Ridgeway Civil War Research Center, A virtual examination of artifacts of the American Civil War
	Civil War Artillery
	by Harry Ridgeway

Research Center: Artillery8750-Fuze-ConfederateRifled

Confederate copper time fuze, rifled projectiles. Research Center: Artillery8750-Fuze-ConfederateRifled, Details click: http://relicman.com/artillery/Artillery8750-Fuze-ConfederateRifled.html.

Confederate time fuze, rifled projectile, common (standard)
The Confederate copper time fuze adaptor was the Confederate answer to the Parrott time fuze. Fuze was installed and tightened with two spanner holes. This relatively simple fuze was activated by setting a paper fuze in the center hole, the paper would ignite upon firing, burn time would be predetermined by the concentration of flammable product in the paper fuze. Bottom of fuze was milled, there is a great deal of milling variation in the shape of the bottom, as these fuzes were apparently produced by many different small manufacturers. Large hole in the base was probably intended for common rounds, those not containing case shot. Long fuze was generally intended for Confederate rifled projectiles of field caliber but it is also occasionally found in larger calibers. Fuze measures: length 1.7in. to 1.9in., body diameter .98in., flange diameter 1.25in., 12 threads per inch.
Ref: Jones Fuze pg. 41.

A0184.1...Confederate time fuze, rifled projectile, common (standard) The Confederate copper time fuze adaptor was the Confederate answer to the Parrott time fuze. Fuze was installed and tightened with two spanner holes. This relatively simple fuze was activated by setting a paper fuze in the center hole, the paper would ignite upon firing, burn time would be predetermined by the concentration of flammable product in the paper fuze. Bottom of fuze was milled, there is a great deal of milling variation in the shape of the bottom, as these fuzes were apparently produced by many different small manufacturers. Large hole in the base was probably intended for common rounds, those not containing case shot. Long fuze was generally intended for Confederate rifled projectiles of field caliber but it is also occasionally found in larger calibers. Fuze measures: length 1.7in. to 1.9in., body diameter .98in., flange diameter 1.25in., 12 threads per inch. Recovered: Shenandoah Valley 1864 campaign, Virginia, by Harry Ridgeway. Ref: Jones Fuze pg. 41. Ridgeway collection, Old Court House Civil War Museum, Winchester, Virginia

A0184.2...Confederate time fuze, rifled projectile, common (standard) The Confederate copper time fuze adaptor was the Confederate answer to the Parrott time fuze. Fuze was installed and tightened with two spanner holes. This relatively simple fuze was activated by setting a paper fuze in the center hole, the paper would ignite upon firing, burn time would be predetermined by the concentration of flammable product in the paper fuze. Bottom of fuze was milled, there is a great deal of milling variation in the shape of the bottom, as these fuzes were apparently produced by many different small manufacturers. Large hole in the base was probably intended for common rounds, those not containing case shot. Long fuze was generally intended for Confederate rifled projectiles of field caliber but it is also occasionally found in larger calibers. Fuze measures: length 1.7in. to 1.9in., body diameter .98in., flange diameter 1.25in., 12 threads per inch. Recovered: Shenandoah Valley 1864 campaign, Virginia, by Harry Ridgeway. Ref: Jones Fuze pg. 41. Ridgeway collection, Old Court House Civil War Museum, Winchester, Virginia

A0184.3...Confederate time fuze, rifled projectile, common (standard) The Confederate copper time fuze adaptor was the Confederate answer to the Parrott time fuze. Fuze was installed and tightened with two spanner holes. This relatively simple fuze was activated by setting a paper fuze in the center hole, the paper would ignite upon firing, burn time would be predetermined by the concentration of flammable product in the paper fuze. Bottom of fuze was milled, there is a great deal of milling variation in the shape of the bottom, as these fuzes were apparently produced by many different small manufacturers. Large hole in the base was probably intended for common rounds, those not containing case shot. Long fuze was generally intended for Confederate rifled projectiles of field caliber but it is also occasionally found in larger calibers. Fuze measures: length 1.7in. to 1.9in., body diameter .98in., flange diameter 1.25in., 12 threads per inch. Recovered: Richmond Virginia. Ref: Jones Fuze pg. 41.

A0973...Confederate time fuze, rifled projectile, common (standard) The Confederate copper time fuze adaptor was the Confederate answer to the Parrott time fuze. Fuze was installed and tightened with two spanner holes. This relatively simple fuze was activated by setting a paper fuze in the center hole, the paper would ignite upon firing, burn time would be predetermined by the concentration of flammable product in the paper fuze. Bottom of fuze was milled, there is a great deal of milling variation in the shape of the bottom, as these fuzes were apparently produced by many different small manufacturers. Large hole in the base was probably intended for common rounds, those not containing case shot. Long fuze was generally intended for Confederate rifled projectiles of field caliber but it is also occasionally found in larger calibers. Fuze measures: length 1.7in. to 1.9in., body diameter .98in., flange diameter 1.25in., 12 threads per inch. Recovered: Shepherdstown Virginia, now West Virginia. Ref: Jones Fuze pg. 41. Ridgeway collection, Old Court House Civil War Museum, Winchester, Virginia

A2257...Confederate time fuze, rifled projectile, common (standard) The Confederate copper time fuze adaptor was the Confederate answer to the Parrott time fuze. Fuze was installed and tightened with two spanner holes. This relatively simple fuze was activated by setting a paper fuze in the center hole, the paper would ignite upon firing, burn time would be predetermined by the concentration of flammable product in the paper fuze. Bottom of fuze was milled, there is a great deal of milling variation in the shape of the bottom, as these fuzes were apparently produced by many different small manufacturers. Large hole in the base was probably intended for common rounds, those not containing case shot. Long fuze was generally intended for Confederate rifled projectiles of field caliber but it is also occasionally found in larger calibers. Fuze measures: length 1.7in. to 1.9in., body diameter .98in., flange diameter 1.25in., 12 threads per inch. Ref: Jones Fuze pg. 41.

A2660...Confederate time fuze, rifled projectile, common (standard) The Confederate copper time fuze adaptor was the Confederate answer to the Parrott time fuze. Fuze was installed and tightened with two spanner holes. This relatively simple fuze was activated by setting a paper fuze in the center hole, the paper would ignite upon firing, burn time would be predetermined by the concentration of flammable product in the paper fuze. Bottom of fuze was milled, there is a great deal of milling variation in the shape of the bottom, as these fuzes were apparently produced by many different small manufacturers. Large hole in the base was probably intended for common rounds, those not containing case shot. Long fuze was generally intended for Confederate rifled projectiles of field caliber but it is also occasionally found in larger calibers. Fuze measures: length 1.7in. to 1.9in., body diameter .98in., flange diameter 1.2 5in., 12 threads per inch. Ref: Jones Fuze pg. 41.

Confederate time fuze, rifled projectile, "case" shot
The Confederate copper time fuze adaptor was the Confederate answer to the Parrott time fuze. Fuze was installed and tightened with two spanner holes. This relatively simple fuze was activated by setting a paper fuze in the center hole, the paper would ignite upon firing, burn time would be predetermined by the concentration of flammable product in the paper fuze. Bottom of fuze was milled, there is a great deal of milling variation in the shape of the bottom, as these fuzes were apparently produced by many different small manufacturers. Small hole in the base was probably intended for "case " shot , the idea being that less powder is in a case shot ball, and the small hole would reduce the risk of a blowout. Long fuze was generally intended for Confederate rifled projectiles of field caliber but it is also occasionally found in larger calibers. Fuze measures: length 1.7in. to 1.9in., body diameter .98in., flange diameter 1.25in., 12 threads per inch.
Ref: Jones Fuze pg. 41.

A1984...Confederate time fuze, rifled projectile, "case" shot The Confederate copper time fuze adaptor was the Confederate answer to the Parrott time fuze. Fuze was installed and tightened with two spanner holes. This relatively simple fuze was activated by setting a paper fuze in the center hole, the paper would ignite upon firing, burn time would be predetermined by the concentration of flammable product in the paper fuze. Bottom of fuze was milled, there is a great deal of milling variation in the shape of the bottom, as these fuzes were apparently produced by many different small manufacturers. Small hole in the base was probably intended for "case " shot , the idea being that less powder is in a case shot ball, and the small hole would reduce the risk of a blowout. Long fuze was generally intended for Confederate rifled projectiles of field caliber but it is also occasionally found in larger calibers. Fuze measures: length 1.7in. to 1.9in., body diameter .98in., flange diameter 1.25in., 12 threads per inch. Ref: Jones Fuze pg. 41. Ridgeway collection, Old Court House Civil War Museum, Winchester, Virginia

This is the "Ridgeway Civil War Research Center", a research tool for educational purposes only, and is provided at no cost to the reader. Some of the relics listed are retained in the author's collection, most reside in other collections and are not owned by the author. None of the items listed in this section are for sale, please refer to relicman.com sales listings for items offered for sale. This is a work in progress, I list items as I get to them, there are many patterns that are not listed yet, this list will be regularly updated as I get pictures and descriptions for more items. I will also correct mistakes, so if you see any please tell me. All items listed are believed to be authentic to the Civil War or as otherwise described. This information is available for research purposes, pictures may be used by permission only.
All excavated artifacts have been recovered from private property with owner's permission.
All projectiles listed have been disarmed.

Most information on this page is from:
Field Artillery Projectiles of the American Civil War, 1993 Edition. by Thomas S. Dickey and Peter C. George.
Civil War Heavy Explosive Ordnance, A Guide to Large Artillery Prjectiles, Torpedoes, and Mines, by Jack Bell.
Artillery Fuses of the Civil War, by Charles H. Jones.
Pictures are by the author, unless otherwise indicated.

Ridgeway Civil War Research Center, A virtual examination of artifacts of the American Civil War. Artillery Research center, artillery, click: http://relicman.com/artillery/Artillery0000-Index.html. Research center, artillery, click: http://relicman.com/artillery/Artillery0000-Index.html.

and now a word from our sponsor.....

Civil War Relicman, Harry Ridgeway, Civil War artillery, Relicman sales catalog. Click here: http://relicman.com/artillery/RelicmanSalesArtillery1.html. Artillery for sale: http://relicman.com/artillery/RelicmanSalesArtillery1.html.